CAN-BUS+RS232 communication
Automatic transfer switch between DC and AC power within 10ms
Low THD ensure sensitive loads working stably
MAX. 90A charge current for AGM/GEL/Flooded/Lithium batteries
PTM-12 remote controller makes it convenient for you to observe and control from a distance
Extra charging function for starter battery
Keep working continuously with full power output at -10~50℃
Battery temperature compensation charging design in cold and warm conditions, helps prolong the battery life.
Ultra-low idle consumption could effectively save the energy
Auto GEN start/stop
Electronic protection against Over/under voltage, overload, overheating, short circuit
This kind of portable inverter charger comes with 2 years warranty
Models | CMT1000 |
Rated Power(-10-50℃) | 1000W |
DC Input | |
Rated Voltage | 12VDC (10.0~16.0VDC)x2 for 24VDC |
Max. Charge Current | 45A-house battery ; 3A-start battery |
Battery Type | AGM/Gel/Flooded/Lithium |
AC Input | |
Output Voltage | 170-275VAC |
Input Frequency | 45~65Hz |
AC Output | |
Output Voltage | 110/120VAC±5%; 230/240VAC±5% |
Oput Frequency | 50/60Hz±0.3 |
Wave Form | Pure Sine Wave |
Transfer Time | ≤8ms |
Efficiency | >88% |
Overload | 105-120% 10s/ >120% 3s/ >150% 1s |
Max. Bypass | 6000W |
Protection | DC over/low volt, AC input low/low volt, AC short circuit, over temp, overload |
Self-consumption | 20.0W |
Idle-consumption | 19.0W |
Protection | |
DC Low-volt Alarm/Shutdown | 10.5V (Customizable at Engineering mode) |
AC Low-volt Switch To DC | 187.0V (Customizable at Engineering mode) |
Bypass To Invertering | 198.0V (Customizable at Engineering mode) |
Battery Over-charge Shutdown | 16.5V |
General | |
Working Temperature | -10~45℃ |
Storage Temperature | -20~70℃ |
Work/ Storage Humidity | 0-90% No condensation |
Dimension (W*D*H) | 450*255*104mm |