2000W pure sine wave
It is a type of pure sine inverter works with the optional source priority
Gen starter gives boost signal to start backup generator for emergency
Approved by ETL under UL458 and CSA C22.2, CE under EN55022:2006+A1:2007 standards
Models | CPT2000 |
Output Power | 2000W |
Surge Power | 6000W |
Output Voltage | 100/110/120VAC±5%;220/230/240VAC±3%;120/240VAC Split phase |
Output Frequency | 50/60Hz±0.5% |
Idle Consumption(Saving mode/working mode) | 5W/12W |
Output Waveform | Pure sine wave(THD<5%) |
AC Input Range | 90~135VAC/165~265VAC |
AC Input Frequency | 50/60Hz±0.5% |
DC Input Voltage | 12/24/48VDC |
DC Voltage Range | 10.0-16.0 / 20.0-31.0 / 42.0-62.0 VDC |
Efficiency | 110VAC | 86% |
230VAC | 88% | |
AC Charger/Bypass | |
DC Output Voltage | Bulk(13.0-14.9V); Absorption(14.9-15.1V); |
Float charge(13.3-13.8V)(24V*2,48V*4) | |
Overcharge Protection | 15.7VDC(24V*2, 48V*4) |
Charge Current | 110VAC | 50A/25A/20A |
230VAC | 50A/25A/20A | |
Transfer Time | ≤10ms |
Input Waveform | Pure sine wave(Utility power or generator) |
MAX Bypass Current | 20A |
Control & Signal | |
LED Indicator | 7-led for working mode |
Remote Control(optional) | CR10;PTM-12 |
Dip Switch | Charge current; Output frequency; AC output voltage; DC/AC priority |
Network Function | Stand-alone, orTCP/IP optional |
Battery Type | Lithium, Gel, AGM, Wet or customized |
Dry Contact Terminal | By relay |
General Specification | |
Safety | UL458, LVD(EN60950) |
EMC | FCC part 15 ClassA, CE(EN55022:2006+A1:2007) |
Operating / Storage Temp | -20-50℃/-30-70℃ |
Working Humidity | -20-90%RH |
Weight(Kg/Ib) | 17/37 |
Dimension(mm/inch) | 525*250*185/ 21*10*7 |
Application | Mobile vehicle, Yacht, Solarpowersystems, Portable equipment, Power tools, Home and Office appliances |