PWM 50A solar or MPPT 60A solar charger
Charging priority between utility AC power and solar power
This type of hybrid solar inverter charger is featured by adjustable AC input voltage (90~280VAC)
Support USB, RS485 communication function with monitoring software
Parallel operation with up to 6 units
Smart LCD setting (Working mode, Charge Current, Charge Voltage, etc.)
Built in Multi-protection: Over/under voltage, overload, overheating, short circuit protection
Auto switch between Utility AC and Battery with minimum 10ms
Cold start function
2 years warranty
Models | SPE5000 |
(PWM ver.) Battery System Voltage | 48VDC |
(MPPT ver.) Battery System Voltage | 48VDC |
Inverter Output | |
Rated Voltage | 5000VA/4000W |
Surge Power | 10000VA |
Waveform | Pure Sine Wave |
AC Voltage Regulation(batt. mode) | 220VAC~240VAC |
Output Voltage | 220/230/240 VAC±3% |
Inverter Efficiency(peak) | 0.93 |
Transfer Time | 10ms (UPS), 20ms(APL) |
Battery | |
Rated Voltage | 48VDC |
Floating Charge Voltage | 54VDC |
Overcharge Protection | 60VDC |
PWM ver. Charging Info | |
(PWM ver.) PV Open Voltage | 105VDC |
Standy Power Consumption | 2W |
(PWM) Solar Charge Current | 50A |
(PWM) Maxium Solar Input | 2400W |
Maxium AC Charge Current | 60A |
(PWM ver.) Joint Charge Current | 110A |
MPPT ver. Charging Info | |
(MPPT ver.) PV Open Voltage | 145V |
Standy Power Consumption | 2W |
(MPPT) Solar Charge Current | 60A-48A |
(MPPT) Maxium Solar Input | 3000W/4000W |
Maxium AC Charge Current | 60A |
(MPPT ver.) Solar Current+AC Current | 120A/140A |
General Parameter | |
Operating/ Storage temperature | 0~55℃/-15~60℃ |
Working Humidity | 5%~95% relative humidity(Non-condensing) |
Cooling | Auto fan cooling |
(PWM ver.) Dimensions(D*W*H)(mm) | 120*295*468 |
(MPPT ver.) Dimensions(D*W*H)(mm) | 128*272*355 |
(PWM ver.) Net Weight(kg) | 9.8 |
(MPPT ver.) Net Weight(kg) | 13.5 |