Support RS485 communication
Low THD ensure sensitive loads working stably
MAX. 80A charge current for AGM/GEL/Flooded/Lithium batteries
It is a type of split phase inverter charger that has heavy duty design for motor loads
Keep working continuously with full power output at -10~50℃
Battery temperature compensation charging design in cold and warm conditions helps prolong the battery life
Ultra-low idle consumption could effectively save the energy
Electronic protection against Over/under voltage, overload, overheating, short circuit
2 years warranty
Models | DPT8000 |
Rated Power(-10-50℃) | 8000W |
DC Input | |
Rated Voltage | 24VDC (20.0~32.0VDC)x2 for 48VDC |
Max. Charge Current | 80A-house battery |
Battery Type | AGM/Gel/Flooded/Lithium |
AC Input | |
Output Voltage | 170-275VAC |
Input Frequency | 45~65Hz |
AC Output | |
Output Voltage | 120/240VAC±5% |
Oput Frequency | 50/60Hz±0.3 |
Wave Form | Pure Sine Wave |
Transfer Time | ≤8ms |
Efficiency | >88% |
Overload | 105-120% 10s/ >120% 3s/ >150% 1s |
Max. Bypass | 8000W |
Protection | DC over/low volt, AC input low/low volt, AC short circuit, over temp, overload |
Self-consumption | 55.0W |
Idle-consumption | 25.0W |
Protection | |
DC Low-volt Alarm/Shutdown | 21.0V (Customizable at Engineering mode); x2 for 48VDC |
AC Low-volt Switch To DC | 187.0V (Customizable at Engineering mode) |
Bypass To Invertering | 198.0V (Customizable at Engineering mode) |
Battery Over-charge Shutdown | 31.4V |
General | |
Working Temperature | -10~45℃ |
Storage Temperature | -20~55℃ |
Work/ Storage Humidity | 0-90% No condensation |
Dimension (W*D*H) | 607*308*198mm |