Regulated by UL458 and CSA C22.2, CE under EN55022:2006+A1:2007 standards
The soft start design of this type of DC to AC power inverter can effectively reduce the impact of large current on the machine
External LCD remote control panel allows the control from a remote
Enhanced heat dissipation design can avoids the power drop caused by high temperature and extend the life of inverters
Built in Multi-protection: Over voltage, overload, over-current, under-voltage, overheating, short circuit protection.
2 years warranty
Model | SCH600 |
Output Power | 600W |
Surge Power | 1200W |
Idle Power | 3W |
DC Input Voltage | 12VDC |
DC Input Regulation | 10.5-15 VDC |
Output Voltage | 100/110/120VAC +/- 3%; 220/ 230/ 240VAC +/- 5% |
Output Frequency | 50/60HZ +/- 0.05% |
Output Waveform | True sine wave THD<3% |
Power Factor | 0.8-1 |
Efficiency | 110V 90% |
220V 92% | |
Control & Signal Indicates | |
Fault Indication | Red LED light and buzz alarm |
Work Indication | Green LED light |
Remote Control | CR10 or CR11 (work with DBS battery isolator) |
Battery Type | AGM, Seal lead-acid, Gel, Open lead-acid, LiFe04 |
Protection | Overload,Over/under input voltage, |
Over temperature, Short circuit | |
Safety | AS/NZS 4763:2011, UL458, LVD(EN60950) |
General Parameter | |
Operating Temp | -5-40℃ |
Working Humidity | 20-90% RH |
Storage Temp | -30-70 ℃ |
Cooling | Automatic temp-control fans |
Weight (kg) | 1.5 |
Size (mm) | 150*237*79 |